Waste Tire Recycling Powder Line Recycled to Rubber Powder

Waste Tire Recycling Powder Line Recycled to Rubber Powder

Squander Tire Recycling PowEPTLine Recycled to Rubber Powder

hydraulic method, effortless operation and secure.
Mechanical description: the tires far more than 800 need to have to lower, and lower into 4 parts in EPT .the dimension of piece is 200-500mm.
Notes for employing tire cutter:
a. Examine the knives often, if show up evident blunt, it should be keep timely, and the services is two-three several years.
b. the oil in hydraulic station should be filtered and changed routinely. EPTly filter once each one and 50 percent 12 months.
c. Wearing components: rubber seals, delivered with one more established when ship the EPT to the consumer.

three amp4. EPT tire shredEPTZPS-900
Use:
This EPT can straight crush tires more compact than 800mm tires. At the EPT temperature, can be set right crushed into fifty * fifty mm block, so the up coming rotating can grind into 10-30 meshes or wire and fiber separation tools.
Attribute:
This EPT is a compact composition, innovative technologies, low energy intake, substantial effectiveness, smashing off the test room for the framework, servicing is especially convenient instruments with carbide surfacing technology, substantial hardness, large put on resistance, and repeated mend making use of, so has a EPTer service daily life rotary screen for the lattice structure of steel mesh, blanking huge location, enabling the screening of qualified rubber. Following the partition of huge tires can accomplish the influence of the very same!
Mechanical description: the tires of 800mm diameter and rubber ring can right be damaged into 50*fifty mm of rubber block.

Notes for making use of EPT tire shredder:
a. Inject equipment oil into EPT oil (hypoid gear oil), major bearings use calcium-based mostly grease lubrication, a few months soon after the procedure of the EPT, the oil need to be replaced and clean the gas tank. Given that then change the oil as soon as time each and every calendar year.
b Following deal with three,000 tons of waste rubber (in regular circumstances),the consumer need to grind the blade chopping edge once time. The blades is the use components, the EPT support lifestyle is five-six several years, when offering the EPT to the consumer, the shredEPTwill be geared up with edge hardness layer patching content (electrodes).
five. Double Rolls Rubber Crusher XKP-560
Use:
Primarily employed for crack huge rubber blocks into 40-50mm little rubber blocks.
Technical parameters:
Construction: The rollers adopt alloy chilly challenging solid irons with wear-resisting, tough figures. The mill flour is with teeth, large groove.
In orEPTto lengthen the provider life of the cracker, we suggest build foundations for rubber cracker.
The configurations of our XKP-560 rubber cracker are nylon bush grease lubrication and tough equipment surface area EPT with decrease sound and EPTer provider life.
5Our crackers are developed XiHu (West Lake) Dis.Hu (West Lake) Dis.nized with wonderful running platforms, all the wires will be connected well from managing method to motor. When employing the EPT, the clients just need to have to connect straight to the EPT.

Welcome to our factory!

Waste Tire Recycling Powder Line Recycled to Rubber Powder

Waste Tire Recycling Powder Line Recycled to Rubber Powder

Leave a Reply

Your email address will not be published. Required fields are marked *