Laminating Film-BOPP Gloss Thermal Printing Film

Laminating Film-BOPP Gloss Thermal Printing Film

*Materials

Area layer: BOPP
Glue layer: EVA adhesive

*Specification

Thickness: 18mic/20mic/22mic/23mic/24mic/25mic/27mic/28mic/30mic/35mic
Width: 300~1800mm
Duration: two hundred~3000m
Paper main: 25.4mm (one inch), 58mm(two.25inches), 76mm(3 inches)
Bonding: Much less than two

*procedure parameter:

Products for thermal movie: Dry and wet movie laminator
Lamination temperature: 95~105c
Roller stress: 10-20mpa
Velocity: eight-20 m/min

*instructions for employing BOPP thermal laminating movie:

Typical approach temperature is 90c-105c, roller stress and temperature differ with various varieties of paper, ink and EPTs.
When utilizing the film for the very first time or do other remedy, try a small quantity just before mass laminating.
Make sure the ink is dry ahead of laminating. It will delaminate when the paper contains too much moisture and powder.
Make certain set the content in a lower-temperature, dry spot.

*EPT:

SPECIFICATION 20mic 22mic 24mic 25mic 27mic 28mic 30mic
GLOSS GLOSS GLOSS GLOSS GLOSS GLOSS GLOSS
THICKNESS (mic) Base 12 twelve twelve fifteen 15 eighteen eighteen
ADHESIVE eight ten twelve 10 twelve 10 12
Total 20 22 24 25 27 28 30
WEIGEPT m2/kg 54.3 49.three 45.045 43.38 40.eleven 38.789 36.15
kg/m2 .01844 .57132 .5712 .57105 .57193 .57178 .57166
WIDTH(mm) 300mm-1800mm
Length(m) 200m-3000m
PARER Core 25mm(1inch),58mm(2.25inches),76mm(3inches)
BONDING Much less THAN two

SPECIFICATION 25mic 27mic 28mic 30mic
MATT MATT MATT MATT
THICKNESS (mic) Base fifteen fifteen eighteen eighteen
ADHESIVE 10 12 ten 12
Whole 25 27 28 30
WEIGEPT m2/kg 44.25 forty one 40 37
kg/m2 .5716 .5714 .5712 .5711
WIDTH(mm) 300mm-1800mm
Duration(m) 200m-3000m
PARER Main 25mm(1inch),58mm(2.25inches),76mm(3inches)
BONDING Considerably less THAN two

Laminating Film-BOPP Gloss Thermal Printing Film

Laminating Film-BOPP Gloss Thermal Printing Film